REX12-TB1-107-DC24V-4A ETA Electronic circuit breaker
1-channel
Rated current 4A
- Buy 10 for €47.47 each and save 5%
- Buy 25 for €43.58 each and save 12%
- Buy 50 for €40.08 each and save 20%
- Buy 100 for €38.90 each and save 22%
Artikel dem Warenkorb hinzufügen oder Alles auswählen
The new REX12 electronic overcurrent protection device combination consists of the EM12-T power supply module and the REX12-T electronic circuit-breakers, which can be connected in any modular way on one or two channels. The modules, each only 12.5 mm narrow, are completely designed in push-in technology including orange terminal actuators and therefore enable tool-free, time-saving and maintenance-free wiring.
The power feed module is designed for DC 24 V and 40 A and accepts a maximum of 10 mm² with wire end ferrules for the positive (+) feed. On the load output side, the automatic circuit breaker can be wired with 2.5 mm².
The new REX12 generation combines flexibility with compactness. It is therefore precisely tailored to the requirements of mechanical engineering. No additional accessories are required for the electrical and mechanical connection of the individual components. This saves time and money!
Key features:
- Device combination power supply module and electronic circuit breaker
- Single and dual-channel selective load protection using an electronic switch-off characteristic
- No accessories required to connect the components
- Width per channel only 12.5 mm (1-channel) or 6.25 mm (2-channel)
- Rated current in fixed current levels 1 A...10 A
- Integrated fail-safe element, precisely matched to the rated current
- Switching on capacitive loads up to 20,000 μF
- Manual ON/OFF/reset button
- Clear signalling via LED and signal contact Si
- Connection via push-in terminals incl. orange terminal actuator
Technical data:
housing material | plastic |
enclosure mounting | mounting rail to EN 60715-35x7.5 |
ambient temperature (TU) | -25 °C...+60 °C (without condensation, see EN 60204-1) |
storage temperature | -40 °C...+70 °C |
installation temperature | +5 °C...+60 °C |
humidity Heat | 96 hours/95 % relat. Humidity/40 °C in accordance with IEC 60068-2-78-Cab Climate class 3K3 in accordance with EN 60721 |
vibration resistance | 3 g, test according to IEC 60068-2-6 Test Fc |
protection class | iEC 60529, DIN VDE 0470 IP30 |
eMC requirements (EMC Directive, CE marking) |
interference emission: EN 61000-6-3 Interference immunity: EN 61000-6-2 |
insulation coordination (IEC 60934) |
0.5 kV / pollution degree 2 |
dielectric strength | max. DC 30 V (load circuit) |
insulation resistance (off state) | not applicable, only electronic switch-off |
Approval:
test centre | test standard | rated voltage | rated current range |
uL | uL 2367 | dC 24 V | 1 A...10 A |
uL |
UL 1310 |
dC 24 V |
1 A, 2 A, |
uL |
uL60947 / cULus508listed |
dC 24 V | 1 A...10 A |
Item name | REX12-TB1-107-DC24V-4A ETA Electronic circuit breaker |
---|---|
SKU | 24-01800 |
Weight | 0.054400 |
Version | 1 ohne galvanische Trennung |
Design: Communication, interface | 01 analog Signal |
Country of manufacture | Germany |
Signal output | 7 Status output |
Connection type Main connections | P10 flat plug DIN 46244-A6.3-0.8 |
Series | REX12 |
Signal input | 0 without signal input |
Actuating element | Manual ON/OFF/Reset button |
Undervoltage module | none |
Operating voltage | DC 24 V |
Number of poles | 1-pole |
Rated current range | 4A |
Mounting type | TB Mounting rail attachment, with signal contact |
Characteristic | Medium time-lag tripping characteristic (standard) |
Additional function | 0 ohne |
Number of channels | 1 1 channel (only 1 channel) |
Traub order number | REX12-TB1-107-DC24V-4A |
Commodity code | 85362010 |
Manufacturer | E-T-A |
Manufacturer number | 0REX12014151 |