SVS02-16-P310-L50-S15-E00-B10 ETA Power distribution system

The E-T-A power distributor SVS02 is designed to accommodate the electronic circuit breakers ESS20-003 or ESX10-103 and distributes the current fed in by a switched-mode power supply unit up to 40 A to 4, 8, 12 or 16 channels as required. The main supply from the power supply unit is via screw terminals.

The individual circuit breakers can be plugged in. The connections to the loads are also made via plug-in terminals (standard cage clamp). The power distributor also contains the signalling wiring for the individual channels, which are grouped together as a collective signal. The power distributor can be snapped onto a DIN top-hat rail.

Suitable for: ESS20-003, ESX10-103, 2210-S21, 3600

Technical data:

Modular power distribution system for short-circuit current-limited DC 24 V applications, operating voltage max. DC 32 V continuous load max. 40 A

Connection of DC 24 V power supply max. 40 A:
3 connection terminals (screw terminals max. 10 ^mm2) can be looped through for:
- DC 24 V (+) = X 21 +
- DC 24 V (-) = X 21 -
- FE functional earth = X 21 FE

Modular design of the ESS20 slots F1...F4 (..F8, ...F12 or ...F16):
- SVS02-04/4-channel/F1...F4 = Kl. X1...X4
- SVS02-08/8-channel/F1...F8 = Kl. X1...X8
- SVS02-12/12-channel/F1...F12 = Kl. X1...X12
- SVS02-16/16-channel/F1...F16 = Kl. X1...X16

5 load outlets per channel Fully equipped with plug-in cage clamp terminals (standard), wiring 5 x max. 2.5 ^mm2/ without wire end ferrule, max. 8 A:
- (L+S) collective output (+), bridged internally across all channels
- (L+L) fused load output (+), per channel
- (-) DC 24 V (-)
- (-) DC 24 V (-)
- (FE) functional earth

Signalling terminal (X31) forsignalling terminal (X31) for sum signal completely equipped with plug-in cage clamp terminals (standard), wiring 5 x max. 2.5 ^mm2/without wire end ferrule, max. 0.5 A (signalling contact ESS20):
- (+) internal +DC 24 V feed for signalling from terminal X 21 + via insulated jumper from (+) to (SC), fused via CB2
- (SC) external +DC 24 V feed option for signalling, fused via CB1 - (S) external +DC 24 V feed option for signalling, fused via CB2 via CB1
- (S0) signal output collective signalling
- (-) additional outgoing circuit DC 24 V (-)
- (FE) additional outgoing circuit functional earth

Selective overcurrent protection CB1 and CB2 for collective signalling of the power distributor, red LED flashes after CB1 is triggered. Resetting the circuit breakers: Briefly press the red operating button

Protection class in accordance with DIN 40050: IP20
Insulation coordination in accordance with IEC 60934: 0.5 kV Pollution degree 2

Dielectric strength AC 500 V

Temperature range: 0...50 °C (without condensation)

for top-hat rail mounting EN 50022 - 35 x 7.5

Dimensions: see dimensional drawing