3070-B2/04 Weco cover cap for 307-PCF and 3070-PCM

The multiple screw connector strip 307-PCF with 11 mm pitch is available from 2 to 21 poles. It is equipped exclusively with grooved flat terminals and is used in particular for the mains connection of appliances and in many other areas. The grooves provide easy guidance during connection and prevent the conductor from slipping sideways when the screw connection is tightened. A fixing hole is provided at each end of the strips. The terminal strip consists of a polycarbonate housing and riveted flat terminals form R in accordance with DIN 41000/12.66.

Weco terminal strips have screwless terminal points or socket terminals. The screw terminals are available for various cross-section ranges with or without wire protection. A combination with solder connections or plug connectors is also available. The polyamide material used passes the VDE 0470 ball pressure test at 125 degrees The socket terminal strip 327 with a 14.5 mm pitch is available from 1 to 12 poles and can easily be cut to the required number of poles. Thanks to the M5 screw, the 6.3 mm socket bore and a creepage distance of over 9 mm between the terminal body and the contact surface, this type is particularly suitable for large cross-sections, currents and voltages. There is a fixing hole between each of the two poles. The flexible polyamide housing enables fastening even on curved surfaces. The wire protection of the "-HDS" version reliably prevents damage caused by the screw, especially with multi-stranded conductors.